Collection
Line shaft SWA-BB (Bellow-Bellow)
Equipped with two attached metal bellow couplings. High offset compensation of the shaft ends to be connected and best torsional stiffness
€ 0,-
Oldham coupling KSD
• Nominal torque from 0.50 to 1.80 Nm
• Made for hollow shafts
• With clamping and spread hub€ 0,-
Elastomer spiders
The elastomer spider is the intermediate piece in elastomer claw couplings. Its use between the hubs provides damping properties.
€ 0,-
Elastomer coupling SKT
• Nominal torque from 4 to 655 Nm
• Max. torque from 8 to 1310 Nm
• Speed from 3600 to 13000 rpm€ 0,-
Elastomer coupling SKL
• Nominal torque from 4 to 655 Nm
• Max. torque from 8 to 1310 Nm
• Speed from 3600 to 13000 rpm€ 0,-
Elastomer coupling SKK
• Nominal torque from 5 to 560 Nm
• Max. torque from 25 to 1120 Nm
• Speed from 400 to 19000 rpm€ 0,-
Metal bellow couplings MKA-S
MKA-S is the weight-optimized metal bellows coupling with aluminum clamping hubs with a shaft diameter up to 75 mm
€ 0,-
DSR
Available threads: M8 to M30 – L1 = 50 mm to 300 mm
Available UNC threads: 3/8 inch UNC to 3/4 inch UNC – L1 = 8 inches to 10 inches€ 0,-
WE.DSS
The weld-on ring, available as DSR and DSS models, allows anchor points to be welded to lift and lash loads up to 10 tonnes.
€ 387,-
OS.DSR UNC
Lifting eye with double twist.
Maximum load 6,30ton (SF 5:1).
Maximum bolt size UNC 3/8″ to UNC 1″ 1/4€ 0,-
OS.DSS
Stainless steel lifting eye with double rotation.
Maximum load 15ton (SF 5:1).
Maximum bolt size M42.€ 0,-
