Back

Filters

    • SEALTEK Sleeveless seals 600 RC Silicon/Silicon Carbide

    Sleeveless seals 600 RC Silicon/Silicon Carbide

    Sleeveless seals 600 RC Silicon/Silicon Carbide

    € 618,10

    • SEALTEK Cutting oil 200lt.

    Cutting oil 200lt.

    Sealtek's cutting oil has been specifically made for all cutting, drilling, tapping and turning operations on ferrous and non ferrous metals.
    It can be safely considered an all-porpouse product and, thanks to its EP additives, even severe machinings can

    € 4.715,80

    • SEALTEK Cutting oil spray

    Cutting oil spray

    Sealtek's cutting oil has been specifically made for all cutting, drilling, tapping and turning operations on ferrous and non ferrous metals.
    It can be safely considered an all-porpouse product and, thanks to its EP additives, even severe machinings can

    € 34,60

    • SEALTEK Detergent & Lubricant Oil spray

    Detergent & Lubricant Oil spray

    Detergent and lubricating oil
    Light, pure, semi-synthetic oily compound, penetrating the smallest tolerances, cleaning and coating surfaces with a lubricating and protective film. It can be applied everywhere, does not dry and leaves no residual matter.

    € 33,20

    • SEALTEK H.T. Moly Synthetic Lubricant spray

    H.T. Moly Synthetic Lubricant spray

    Sealtek®'s h.t. moly synthetic lubricant does not cause the formation of greasy deposits or pitch on the parts where it is applied but it dissolves any old carbon deposits, dried grease or bituminous coatings, rendering all equipment perfectly efficient,

    € 52,40

    • SEALTEK Detergent & Lubricant Oil 1lt.

    Detergent & Lubricant Oil 1lt.

    Detergent and lubricating oil
    Light, pure, semi-synthetic oily compound, penetrating the smallest tolerances, cleaning and coating surfaces with a lubricating and protective film. It can be applied everywhere, does not dry and leaves no residual matter.

    € 51,20

    • SEALTEK Metal-Plus 500gr.

    Metal-Plus 500gr.

    Metal-Plus
    Special anti-seize and lubrificant compound containing pure foliated copper microbeads, corrosion inhibitors and E.P. additives. Suitable for all applications where heat and corrosive environmental can create seizing, self-welding and irrevers

    € 47,20

    • SEALTEK Cutting oil 5lt.

    Cutting oil 5lt.

    Sealtek's cutting oil has been specifically made for all cutting, drilling, tapping and turning operations on ferrous and non ferrous metals.
    It can be safely considered an all-porpouse product and, thanks to its EP additives, even severe machinings can

    € 162,-

    • SEALTEK Leak detector

    Leak detector

    Leaks detector
    New polymeric fluid for fast and safe detection of any leakage from pipes, flanges, gaskets and joints of any dimension. Suitable for oxygen, compressed air and all gases.

    € 30,20

    • SEALTEK Detergent & Lubricant Oil 20lt.

    Detergent & Lubricant Oil 20lt.

    Detergent and lubricating oil
    Light, pure, semi-synthetic oily compound, penetrating the smallest tolerances, cleaning and coating surfaces with a lubricating and protective film. It can be applied everywhere, does not dry and leaves no residual matter.

    € 656,40

    • SEALTEK Industrial and naval solvent 200lt.

    Industrial and naval solvent 200lt.

    Effective everywhere

    Sealtek®'s industrial and naval solvent is a combination of different alkaline substances, absorbing agents, specific detergents and water compatible solvents in an aqueous environment that create an intense synergic action ensurin

    € 2.189,40

    • SEALTEK Industrial detergent degreaser 200lt.

    Industrial detergent degreaser 200lt.

    Solvent cleaner for thick dirty deposits quickly dissolving and removing sludge, tar and grease, completely odourless. High flash point (higher than 65°C). Low coefficient of evaporation. It doesn't contain any pollutant solvent. Without oily residues, hi

    € 5.052,20

Compare products Delete all products

You can compare a maximum of 3 products

    Hide compare box